Like many other bodybuilders, I’m guilty of defaulting to a series of go-to bodybuilding exercises that I like to include every time I train a particular muscle group. I don’t believe in change just for the sake of change — even if I did believe in it, I don’t like it. If you are doing something you enjoy in the gym and it’s not broken, why fix it? This doesn’t mean I always train my favorite movements the same way, though. I utilize both strength and hypertrophy days for specific body parts. I also utilize a range of special training techniques to make sure my squats and curls are still as challenging and stimulating as they were when I started training.
Here are my five most favorite training techniques to get the most from each and every exercise (in no particular order.) These strategies will make your existing training routine more effective and diverse when it needs a boost. Try them each one at a time, and see which ones work best for you.
1. Pre-exhaust training
Pre-exhaust training utilizes isolation movements to tire out a specific muscle group before moving on to a compound movement. For example: you could perform a chest fly before the bench press, or leg extensions before you squat. The pre-exhaust method is one of my favorite training techniques for several reasons.
By significantly fatiguing the isolated muscle group, it forces the fresh muscles to pick up the slack during the compound movement. The fatigued muscle gets pushed beyond what it would have been able to do without the pre-exhaust sets, and you don’t have to sacrifice the full-body strength stimulus of, say, a bench press by trying to make it into a chest isolation exercise. Pre-exhaust training utilizes isolation movements to tire out a specific muscle group before moving on to a compound movement. Also, because the target muscle group gets taxed before you hit the heavy iron, you can use more moderate weights on compound movements than you normally would. This makes pre-exhaust training a great tool to work around sore joints and ligaments, or to trigger a fantastic pump on a hypertrophy day.
A superset is two exercises performed back-to-back, with no rest between the exercises. Supersets can increase your workout density, shorten your workout duration, spur new growth, and deliver an incredible pump. You can pair exercises for the same muscle group, like a triceps push-down and close-grip bench press, or pair movements for opposing muscle groups (like biceps curls and triceps push-downs.) Supersets can increase your workout density, shorten your workout duration, spur new growth, and deliver an incredible pump.
Pairing two movements for the same muscle group is often called a “compound set.” I love to use this technique in conjunction with the pre-exhaust technique. As shown by the triceps push-down and close-grip bench press example above, I like to perform an isolation exercise to pre-exhaust a muscle and then immediately follow it with a compound move. This drives the target muscle past the point of failure and results in a killer pump. My other favorite pre-exhaust compound set is straight-arm push-downs paired with lat pull-downs or low cable rows. Your back will feel like it’s being pumped with air!
I also like to pair opposing muscle groups using agonist-antagonist supersets. Agonist-antagonist muscles are essentially opposing muscles which work in opposite directions to complete an action — when one muscle contracts, the other muscle elongates. The biceps and triceps are a great example. Other great agonist-antagonist pairs to train together include the quads and hamstrings, adductors and abductors, and gastrocnemius and tibialis. Of course, you’re not limited to these particular pairs. You can superset nearly any two exercises to get a killer pump, save time, increase your total work, and introduce a taxing metabolic component to your workouts.
3. Rest-pause training
Rest-pause training incorporates a brief rest period, or even a couple of rest periods, during a single set. This allows you to move a heavier weight for more reps than you could in a straight set. You allow your muscles to partially recover — but not completely — before you hammer them with another barrage of heavy reps. For example: if you were to perform rest-pause on a set of triceps push-downs, you would first perform reps until you reach failure or a predetermined number of reps, and then you would rack or hold the weight, take an extremely brief rest period of 5-15 seconds, and rep to failure again. The brief rest allows you to extend your set and overload the working muscle.
Rest-pause sounds simple, and it is, but I would warn you to pay close attention to your form. Don’t use such a heavy weight that you have to get sloppy to move it. While some people go crazy with rest-pauses and use them in multiple sets on a regular basis, I advise you limit them to a single set of each exercise you perform. Rest-pause is an overload technique, not a replacement for straight sets.
My favorite muscle groups to hammer with rest-pause sets are small ones like the calves, biceps, and triceps. In particular, I’ve found that triceps push-downs and calf raises work well with this technique, but trust me — heavy calf raise rest-pause sets aren’t for the weak of spirit! When I’ve tried rest-pause on heavy compound movements like the squat and bench press, I’ve only been able to get an additional rep or two after the pause, because I’m so gassed. That’s hardly worth it, in my opinion.
4. Blood-gorging sets
Blood-gorging sets are high-rep sets performed with minimal rest, typically at the end of your workout (similar to what many people call “burnout sets.”) I prefer the term “blood gorge” because it hammers home the idea that the goal is to saturate the muscle group with as much blood as possible, not just train for a burn.
This massive gorging of blood at the end of a workout is beneficial in two ways: First, blood plasma is your body’s primary shuttle for nutrients, amino acids, testosterone, and growth hormone, all of which are at physiological highs at the end of your workouts (as long as your diet and supplementation protocol are on point.) Second, oxygen-rich red blood cells are largely responsible for eliminating toxic byproducts of weight training such as ammonia, as well as reducing the amount of lactic acid created by your muscles during exercise. Putting more blood in the muscles means they’ll receive more of what they need to recover, and get rid of what they don’t.
A number of prominent bodybuilding trainers also believe that including this type of work can help stretch your muscle fascia (the connective tissue that surrounds muscles and muscle groups.) Creating more room in the fascia theoretically makes subsequent growth easier. I can’t say if this is true or not, but based on the physiques of the people employing these techniques, as well as my personal experience with the technique, it seems reasonable. I usually perform blood-gorging sets on machines that isolate muscle groups, such as a cable machine for curls or push-downs, or the leg curl, leg extension, or calf raise machines. Why machines? They’re simply safer for this type of work, but they’ll also allows you to focus solely on moving the weight. This is helpful at the end of a brutal workout, when you’ve nearly exhausted both the target muscle and any stabilizing muscles.
Occlusion5. Occlusion Training
This is the most outlandish training technique I’ll discuss in this article, so I’ve saved it for last. Some of the top trainers in bodybuilding are currently employing occlusion (or blood flow restriction) training, so it piqued my curiosity. I jumped on the phone recently and spoke about it with Dr. Jacob Wilson, who is a highly respected scientist at the University of Tampa with plenty of experience studying occlusion training. According to his research, it’s an effective training technique, so I tried it out — and man, am I glad I did!
First, let’s define what occlusion training is. It’s a technique in which the upper arm or upper leg is wrapped with a compression sleeve, knee wrap, or wrist wrap, to the point where the veins are mildly compressed, but not so tightly that the arteries are restricted. If you can find the perfect line between “tight” and “too tight,” you create a state in the muscle where the blood can get into the muscle through the arteries, but has trouble exiting the muscle through the veins.
To take advantage of the benefits of occlusion training, Dr. Wilson recommends wrapping at a tightness that feels like a 7 on a scale of 10. Wrap too tightly and you risk completely cutting off blood flow, which will bring on extreme weakness and pain in the muscle. Too loosely, and you won’t reap the maximum benefit of the technique. It may take you some time and experimentation to find the perfect level of tightness. Until you do, it’s OK to err on the side of looseness. In other words, occlusion training drives more total blood into the muscle. Dr. Jacob Wilson cited three major reasons why this is beneficial.
Occlusion training engorges muscle cells with so much fluid that the muscle cells are forced to stretch and expand. You may think you’ve experienced “skin-tearing” muscle pumps during blood-gorging sets, but this technique could make you rethink what a pump can be. The accumulation of blood in the muscle lowers the cellular oxygen levels and makes your muscles feel weaker. In response, your body recruits the larger fast-twitch muscle fibers, which are more receptive to growth.
Finally, when oxygen is low, lactic acid rapidly accumulates in the muscle. This may sound bad—and I’ll be honest, it doesn’t feel great—but some recent studies have shown that lactic acid by itself can increase protein synthesis and spur muscle growth. When I employed occlusion training for the first time while leg pressing, I used considerably lighter weight than usual, got a much more intense pump, and was brutally sore in the days following the workout. Since then, I’ve begun to employ this technique from time to time while training my legs and arms on hypertrophy days, and I must say I am a believer. However, I would add that, while occlusion training is getting more popular all the time, I still think it’s an advanced training technique. Once you’re ready, keep the reps high—like 15 per set—and get prepared for an intense ride!
Now that you’ve been given/reminded of 5 different techniques to help turbo charge muscle growth, I challenge you to try each and very one of them in various workouts, and to find which techniques benefit you the most!
About the Author:
Hunter is an amateur bodybuilder and fitness author. He got his start in bodybuilding through his love of playing football, and now does it with the end goal of being on the Mr. Olympia stage.
For additional tips, tricks, and view into Hunter’s everyday training and meal prep check out Hunter Labrada’s Athlete Page HERE for a FREE Training & Nutrition Program.